Jacksonville Major Printing & Finishing Equipment Auction

Stock #: 3683166

2007 Goss M600C heatset web offset press system configured as an 8-unit / 2-web shaftless press with 22.75" / 578 mm cutoff and 38" / 965 mm web width. This press system includes dual Contiweb splicers, eight Goss M600C printing units with Full-Autoplate, Goss Contiweb EcoCool dryers, 6-roll chill stands, double-web folder superstructure, Goss JF-55 combination folder, Omnicolor controls, QuadTech register and cutoff control, and related pressroom support equipment. Designed for high-volume commercial web offset printing applications.

Stock #: 3683168

2000 Heidelberg M600B 8-unit / 2-web heatset web offset press configured for 32-page production with 22.75" / 578 mm cutoff x 38" / 965 mm web width. This press is equipped with non-autoplate Heidelberg M600B printing units, Duotrol dampening, CPTronic remote inking, two Contiweb CS splicers, TEC air turn system, two Contiweb dryers with integrated pollution control, Heidelberg 6-roll chill stand, JF-50 combination folder with PFF module, QuadTech register and cutoff controls, and Vits sheeter.

Stock #: 3683167

2002 Heidelberg M600A 5-unit heatset web offset press configured for 16-page production with 22.75" cutoff x 38" web width. This press is equipped with full autoplate loading, Duotrol dampening, remote ink control, upgraded Allen-Bradley electronics, upgraded press drive system, TEC two-zone dryer, Heidelberg JF-44 folder, World Wide Graphics UV coater with lamp section, and Vits sheeter with slitter section. A well-equipped M600A press system suitable for commercial web offset printing, direct mail, publication, insert, cover, and sheeted web production.

Stock #: 3682698

2000 Heidelberg V30 12-unit, 8-web coldset web offset press configured for high-volume newspaper and open-web production. Features a 22.75-inch cutoff, 36-inch maximum web width and production of up to 64 pages. Equipped with eight Enkel low-profile splicers, 12 Heidelberg V30 printing units, Telecolor remote inking, two Heidelberg JF35 folders, cutoff controls and a horizontal stacker.

Stock #: 3683185

Heidelberg Web 8 five-unit heatset web offset press featuring a 22.75-inch cutoff and 20-inch maximum web width. The press line includes a Butler 4000 splicer, Heidelberg infeed, five Heidelberg Web 8 printing units, TEC Systems dryer with top-mounted afterburner, three-roll chill stand and combination folder. Additional finishing equipment includes a Baldwin remoist gluer, UV coater with lamp section, Innotech prefolder and Innotech sheeter.

Stock #: 3683173

2003 Müller Martini Corona C15-31 high-speed perfect binding line with 16 auto feeding stations, 31-clamp binder, hotmelt gluing, stream cover feeder, quality control, conveyor system, Zenith-S three-knife trimmer and stacker.

Stock #: 3683178

Müller Martini Star Plus perfect binding line with a 20-pocket gathering section, hotmelt adhesive system, three-knife trimmer and downstream delivery equipment. The main line is identified as a 1995 Müller Martini Star Plus, serial number 94.00988. Later components include a 2003 Müller Martini Zenith 3672 three-knife trimmer, a 2006 Nordson DuraBlue 25 hotmelt adhesive system and a 2009 RIMA delivery system. Configured for gathering, perfect binding, three-side trimming and downstream book delivery.

Stock #: 3683181

2007 Müller Martini Prima Plus saddle-stitching line configured with seven gathering pockets and a cover feeder. The system includes touchscreen controls, a saddle-stitching section and an integrated three-knife trimmer for gathering, stitching and trimming magazines, catalogs, booklets and other commercial products.

Stock #: 3683182

Müller Martini Prima saddle-stitching line configured with nine front-loading gathering feeders and a separate cover feeder. The system includes a Prima SB stitching and trimming section, gathering chain, operator controls and delivery conveyor.

Stock #: 3683180

Müller Martini Bravo Plus six-pocket saddle-stitching line rated for production speeds up to 12,000 copies per hour. The system includes six front-loading Model 370 gathering feeders, a Model 1528 cover feeder, Model 380 stitching unit, Model 449 three-knife trimmer and Müller Martini Rapido stacker.

Stock #: 3683183

Müller Martini Bravo Plus saddle-stitching line equipped with six front-loading gathering feeders and a Model 1528 cover feeder. The system includes color touchscreen controls, pneumatic feeder clutching, ripple start-and-stop controls, an inline three-knife trimmer and a Rima System delivery/stacking unit. Designed for production speeds up to 12,000 copies per hour, the Bravo Plus handles finished products from 148 x 105 mm up to 480 x 320 mm, with a maximum trim thickness of 13 mm.

Stock #: 3683184

Müller Martini Bravo Plus saddle-stitching line configured with six front-loading signature feeders and one cover feeder. The system includes a gathering chain, Bravo Plus stitching section, three-knife trimmer and Rima System automatic stacker/delivery. The Bravo Plus is rated for production speeds up to 12,000 booklets per hour and features touchscreen controls, pneumatic feeder clutching and ripple start/stop operation.

Stock #: 3683190

For Sale. Package consisting of two MBO B26 continuous-feed buckle folder systems. Each folder is configured with a B26-C continuous feeder, four-plate first folding section and four-plate second/right-angle folding section, providing a 4/4 plate configuration.

Stock #: 3683192

Used Polar Mohr 115 EMC programmable paper cutter designed for high-production cutting of paper, printed sheets, signatures and other commercial printing materials.

Stock #: 3683193

Used 2000 Polar Mohr 137 ED high-speed programmable paper cutter offered with a 1997 Polar LW-1000-4 automatic paper pile lift.

Stock #: 3683177

Full paper-trim collection, shredding and baling system consisting of three Balemaster horizontal automatic wire-tie balers, a 2023 Vecoplan VAZ 1100 XL XB shredder, hopper-loading equipment and a comprehensive pneumatic material-handling system. The system includes two cyclones, a multi-bag dust-collection baghouse, pusher motors, material-handling blowers and an extensive trim-pipe network for collecting and transporting paper waste through the system. Each Balemaster baler features hydraulic compression, automatic wire tying, touchscreen operator controls and a dedicated electrical control cabinet. Designed for continuous collection, shredding and baling of paper trim, signatures, printed waste and other recyclable paper materials in a high-production printing or paper-converting operation.

Stock #: 3683179

Large quantity of used heavy-duty selective pallet racking consisting of 205 sections, each measuring approximately 19' high × 42" deep × 8' wide (5,791 × 1,067 × 2,438 mm), with grating. Suitable for warehouse, manufacturing and distribution applications. The system includes green upright frames, adjustable orange horizontal beams and grating for shelf decking. Currently installed in multiple rows with varying beam elevations and storage levels. Adjustable beam positions accommodate different pallet heights and storage requirements. Available as one complete lot of 205 sections, AS IS, WHERE IS. Buyer is responsible for dismantling, loading and transportation. Inspection and removal must be scheduled in advance.

Stock #: 3683191

Two Wulftec Smart Series semi-automatic pallet stretch wrappers designed for securing palletized loads with stretch film in production, warehouse and distribution applications. Each wrapper features a low-profile turntable, powered film carriage and operator-adjustable wrapping controls. The machines are currently installed with floor-recessed turntables. One wrapper is equipped with a Mettler Toledo digital scale indicator for weighing palletized loads.

Stock #: 3683187

Full industrial chilled-water package consisting of two Carrier water-cooled chiller systems with 150 tons and 500 ton capacity. Includes a Carrier 30HXC126R water-cooled screw chiller, a Carrier water-cooled centrifugal chiller system, two Marley NC Class crossflow cooling towers and an Advantage Energy Group dual-system control panel.

Stock #: 3683188

Complete industrial compressed-air and vacuum-equipment package available from a high-volume manufacturing and printing facility. The bulk lot includes four rotary screw air compressors, two industrial vacuum pumps, four refrigerated compressed-air dryers and multiple vertical receiver tanks. Major equipment includes a 2019 Kaeser CSD 125 125 HP rotary screw compressor, Sullair LS-20S 125 HP compressor, 2007 Sullair LS25-200H/W 200 HP water-cooled compressor, 2014 Quincy QSI-925 compressor, 2018 Quincy QSV 750 vacuum pump, Quincy QSVB-20 vacuum system, two Sullair SRP1000 refrigerated dryers and two Kaeser refrigerated dryers.

Stock #: 3683176

Package of seven Square D QED Power Style electrical-distribution switchboards and one three-section Square D Model 5 motor control center. The floor-standing switchboards include 480V and 480Y/277V configurations with maximum supply ratings ranging from 800 to 1,600 amps. Each switchboard includes installed Square D feeder and branch circuit breakers in a Type 1 indoor enclosure. The three-section Model 5 motor control center is rated for a maximum of 600V AC and includes multiple starter/control buckets with disconnect handles, pushbuttons and selector controls. Equipment is used and shows normal wear from an industrial environment. No operational testing information has been provided. All ratings should be verified from the equipment nameplates, and each unit should be inspected by a qualified electrician before installation or energizing.

Stock #: 3683186

Full assortment of used machine shop, metalworking and fabrication equipment available from an industrial facility in Jacksonville, FL. The offering includes manual turning, milling, drilling, welding, cutting, sanding, grinding and hydraulic pressing equipment.

Stock #: 3683189

Large plant spare-parts and maintenance inventory available from a commercial printing and manufacturing facility. The package includes multiple pallets of industrial electric motors, gearmotors, speed reducers, bearings, pumps, shafts, rollers, couplings, pulleys, sprockets, electrical cable, flexible conduit, hoses, fittings and additional mechanical and electrical components. The inventory contains a mixture of surplus replacement parts, boxed components and used take-out equipment. Manufacturers represented include WEG, Siemens, Baldor Reliance, SKF, Timken and other industrial brands. Parts were maintained onsite to support printing presses, bindery equipment, material-handling systems and general plant operations. Offered primarily as one bulk package. Large group purchases may also be considered.