1994 Harris M1000A (8) Unit (2) Web Offset Press 578mm / 22.75" Cutoff

Harris M1000A (8) Unit (2) Web Offset Press System

22.75" (578mm) cutoff x 38" (965mm) Width

CSO # 1350

(Rebuilt in 1994 with upgrades in 2000)

Equipped with:

- (2) Butler Splicers w/ 3000 lb. hoist & (4) Airshafts
- (1) Harris constant tension 2 pass infeed with QTI web guides
- (8) Harris M1000A Printing Units, brush dampening, GMI microcolor II remote inking, Oxydry blanket washers, Ink levelers
- (2) Drive Motors and Fincor drives w/ cabinet
- (1) Main press control console
- (1) GMI microcolor II remote ink control desk
- (2) ASI Dryers with auto doors for two webs approximately 28 ft. in length
- (1) Harris 2 pass chill roll section
- (1) Tec Air Turn system w/ LPA Blower
- (2) Farval grease pumps
- (1) Masterflow etch tank
- (1) AWS Vibe Pack
- (1) AWS Chill Pack
- (1) Ryco Silicone applicators
- (2) Folder compensator sections for double web production
- (1) Former section
- (1) Komori Combination folder equipped w/ Quarter fold / Tabloid / DP capability
- (1) QTI Cutoff Control System
- (1) Harris double former folder with, ribbon deck, folder base, former section and (4) stackers