Machinery Solutions Group, Inc.
  • Home
  • About
  • Used Machinery
  • Services
  • Contact us
  • Sell Machinery

10,000 LB Yale GC100VX Forklift 2013

SKU:
One(1) Used 10,000 LB Yale GC100VX Forklift
MFG. 2013
-8,242 hours
-3 Stage
-92" Lowered Height- 185" Raised Height
-4 Way
-Side Shift
-Fork Positioner
-Good Operating Condition

Dimensions:
-Length- To Face of Forks: 109 in.
-Height- 85-108 in.
-Width- 52 in. Wide Tread: 55.9 in.
-Weight- Empty: 16,023 lbs.
-Wheelbase- 70.5 in.
-Ground Clearance- Lowest Point: 4.6 in. Empty at Center of Wheelbase: 6.1 in.
-Turning Radius- Minimum Outside: 96.3 in.

Engine & Drivetrain:
-Engine Type 4.3 l
-Engine Make GM
-Horsepower 98 hp @ 2,400 rpm
-Displacement 262 ci
-Cylinders 6
-Cooling Fan
-Brakes Method of Control: Foot, service / hand, parking
-Method of Operation: Hydraulic, service / mechanical, parking
-Drive Control Intellix VSM
-Fuel Type LP
-Transmission Techtronix 100

Operational:
-Capacity 10,000 lbs.
-Operator Type Seated rider
-Load Center 24 in.
-Forks Length: 48 in.
-Width: 6 in.
-Thickness: 2 in.
-Mast Hi-Vis™
-Max. Lift Height 208 in.
-Right Angle Stack 114.5 in.
-Lift Speed Empty / Rated Load:
-106.3-112.2 fpm / 102.4-110.2 fpm
-Lower Speed Empty / Rated Load:
-63-82.7 fpm / 88.6-100.4 fpm
-Travel Speed Empty / Rated Load:
-10.4 mph / 10.7 mph
-Carriage Width: 42 in.
-Wheels Front: 2 (driven)
-Rear: 2
-Tires Cushion
-Front: 22 x 12 x 16 in.
-Rear: 18 x 8 x 12.12 in.
-Axle Load Front (Empty / Rated Load):
-7,116 lbs. / 23,349 lbs.
-Rear (Empty / Rated Load):
-8,904 lbs. / 2,531 lbs.

Standard Features:
-100% shock-mounted radiators
-10-micron in-tank hydraulic oil filter
-12 in. steering wheel with spinner knob
-Auto deceleration system
-CANbus electrical system
-Controlled power reversal
-Conveniently located cowl mounted hydraulics
-Conveniently located storage compartment
-Counterweight designed to maximize air flow
-Cowl-to-counterweight access
-CSE (Continuous Stability Enhancement)
-Dash display positioned for optimum visibility
-Directional change lever
-Easy floor plate removal
-Electronic horn
-Electronic inching
-Electronic systems monitoring
-Electronically controlled transmissions
-Enhanced insulated non-metallic hood
-Excellent mast visibility
-Excellent rearward visibility
-Floor mat
-GM 4.3 l V6 LPG engine
-Hall effect sensors and solid state components
-Heavy duty “Combi-Cooler” radiator
-Infinite adjustment steer column
-Intellix VSM (Vehicle Management System)
-Isolated powertrain
-Low brake pedal effort
-Low noise hydraulic pump
-On-board diagnostics with advanced display
-Optimized step height
-O-ring face seals
-PC based diagnostics
-Precise wire harness routings
-Robust transmission clutch packs
-Rugged powertrain
-Sealed dash display
-Sealed electrical connectors
-Simplified daily checks
-Single inching / brake pedal
-Superior filtration system
-Swing out LP tank bracket
-Techtronix 100 transmission
-Uncluttered layout
-Yale Global Hi-Vis mast
1 available

Machinery

Sheetfed Machinery
Web Offset Machinery
Packaging Machinery
Machinery Services
​Machinery Offers 







Company

About our company
Machinery Sales
Consulting Services
Project Management
Machinery Upgrades




Support

Contact
FAQ
Terms of Use

​
© COPYRIGHT 2021 ALL RIGHTS RESERVED.
Machinery Solutions Group, Inc. | 1145 Mitchell Court Suite 219, Crystal Lake, IL 60142 United States | Office Phone: +1(847) 469‐4697  | ​Email: sales@machinerysolutionsgroup.com
  • Home
  • About
  • Used Machinery
  • Services
  • Contact us
  • Sell Machinery