2008 Manugraph DGM 430 (6) Tower Press System 22.75" Cutoff

2008 Manugraph DGM 430 (6) Tower Press System

22.75″ (578mm) cutoff x 35″ (889mm) Width

Equipped with:

• (8) Ebway Jardis Splicers
• (2) Jardis Infeed Compensator Sections
• (6) Manugraph DGM 430 4-High Printing Towers
• 1 tower manufactured and purchased in 2004
• 2 towers manufactured and purchased in 2006
• 1 tower manufactured and purchased in 2008
• 2 supplementary towers purchased in 2014, refurbished, and manufactured in 2008.
• (1) DGM 1035 1:2 jaw type folder with 1/4 fold
• (1) Goss SSC Folder with 1/4 fold
• Half fold products : 6 webs, upper and lower former
• Half fold products : 8 webs
• Quarter fold products : 6 webs
• Double-parallel fold products : 4 webs.
• Maximum speed : 25,000 PPH
• (3) Operator control stations 1 main, 2 secondary
• (1) Wamac TS300 Stacker
• (4) Teco 100 HP Motors and drives
• Optional Muller Martini Alphaliner Inserter
• c. 255M impressions

Standard Features:

• Calibrated lever style keys and swing down ink fountains
• Continuous dampener with variable speed water pick-up roller
• Slot gap plate lock up with center register pin
• Plate cylinder under cut of .008″, .012″ or .014″ (0.020mm, 0.030mm or 0.035mm)
• On-the-run adjustment of place cylinder circumferential register adjustment with calibrated movement of +/- .062 (1.57mm)
• On-the-run adjustment of place cylinder sidelay register movement +/- .125 (3.17mm)
• Manual running unit-to-unit register adjustment for stack units
• Blanket cylinder undercut of .018″ (2.05mm)
• Standard “T” bar blanket cylinder lock up
• Ink fountain roller with quick charge override
• Centralized lubrication block
• Heavy duty drive shaft with thomas coupling
• Top iron with manual compensator
• Contact type web break detector